300ZXT Turbo Setup on L28ET manifold

A =Aluminum turbo unit and forced air outlet

B = Cast iron output exhaust driven impeller housing

C = Cast iron exhaust elbow leading to exhaust header pipe

Pictured above is an 84-89 300ZX water cooled turbo unit and exhaust elbow bolted up to a 280ZXT factory exhaust manifold. This set up can be used on a L28 turbo engine swap into an earlier S30 car with proper angle exhaust header pipe attached to gain the advantages of using a watercooled turbo over the earlier oil cooled design.

ZPARTS.COM often has these individual 81-83 280ZXT specific turbo components in stock and for sale.

-- Eric Neyerlin - owner of ZPARTS.COM

Specials

All content ©2004 Eric Neyerlin - ZPARTS.COM, LLC. All Rights Reserved