This slide shows the front stand and the versatility of this rotisserie.
The whole car can be turned through 360 degrees with little effort.
Every square inch of the body can be made easily accessible for stripping,
treating or repairing. Throughout these slides, the original rotisserie
is shown as somewhat rusted looking pieces and the added brackets made
to fit the 240z are shown as grey primered pieces. |
This slide shows the vertical stand with the rotating arm inserted and
mounted (via the grey brackets) the front chassis legs of the Z. I used
the original towing eye holes on the chassis legs (two on each side)
to mount the rotisserie and car together. |
