|
Paul Henley's Rotisserie Stand Design / slide01Photos & Text by Paul Henley2/20/02 |
Featured
at |
 |
 |
This rotisserie has been used to restore a variety of cars, the last
being a Triumph Stag. After obtaining the stands, I measured them up
to fit the chassis of my 240Z and then made and fitted suitable mounting
brackets to the rotisserie to accept the 240z shell. |
The rotisserie is made up of two separate sections. There is a front
stand and a back stand. Each stand is then made up of two separate pieces.
These are the main vertical stand and the rotating arm that is bolted
to the car. |