|
Large
View |
Wanted: One
or complete set of 14" or 15" Campanola
wheel like example on left, with a Datsun 4 x 4.5" bolt
pattern. Also am looking for any usable center caps like one
in photo.
If
you have one of more of these for sale or know of a source
that may be able to help, please email Eric at eric@zparts.com |
|
Large
View |
Wanted: ATS
center caps, cream white or black. I need
at least two but will buy a complete set of any color that
fits 15x7 ATS wheels made in Germany including any generic
brand with correct measurements. They measure 43mm high and
the insertion prong circle measures 63mm in diameter. Exact
circle diameter of hole opening in center of wheel is 60mm.
If
you have one of more of these for sale, know of a substitute
generic cap to suggest or know of a source that may be able
to help, please call Eric at 541-679-0791 |
|
large
view |
Wanted: One
15x7 ATS
brand wheel made in Germany to complete my broken
set. I have never seen this brand before so I am not sure
where to start looking. Any help you can offer would be most
appreciated.
Need
wheel with Nissan 4 bolt, 4.5" bolt circle with a backspace
measurement of 112mm measured from outer most back rim edge
to wheel hub bolt up surface.
Email
me at eric@zparts.com
or leave message for Eric at 541-679-0791 |
|
large
view |
Wanted: One
14" Minilite rim stamped "14 x 6 1/2
x 13", with a Datsun 4 x 4.5" bolt pattern and 4.25"
backspacing. Has a hole depth of 1", which means it only
fits on Z cars with long studs. Need a wheel in good condition
but doesn't have to be perfect. Please contact Mark at markbelrose@hotmail.com
or (805)736-0803. |
|
| 
|
Wanted: One 14"
GB wheel pictured at left. Please contact Michael
Spreadbury at michaelspreadbury@comcast.net if you can help. |
|
|
Your
Ad Photo here |
Looking
for one rare wheel to complete a valued set? You can advertise
for it here for a small fee. Contact ERIC
for details. |
|
| |
Wheel
Wanted Classified Ads
