|
Page Updated March 12, 2008
RESTORATION & HARD TO FIND PARTS
TO PURCHASE PARTS send your ZIP code to Eric for shipping quote and order instructions
|
|||
If you are restoring a Series One 240Z, these are the tail lights that will make your restoration correct. |
March 2008 Notice: Now processing orders for reconditioned tail lights on a limited, pre payment basis. Average turn around time is 2-3 weeks. Please contact ZPARTS for more information. Nissan originally shipped 240Z models into the US with #152s before changing over to the #166 tail lights sometime in late '71 or early '72. 152s (left unit) are somewhat darker than #166s (RH tail light in lower photo) Each has unique # cast into lenses. #152 taili lights are priced from $150. - $250. per side depending upon overall condition of case, lenses & chrome trim. #166 Tail lights also available in assorted conditions. To purchase contact Sales at ZP |
|
March 2008 Notice: Now processing orders for reconditioned tail lights on a limited, pre payment basis. Average turn around time is 2-3 weeks. Please contact ZPARTS for more information. Priced from $75. -$125. depending upon overall condition of case & lenses. Chrome trim frames and tail light outer finisher surround panels sold separately. Please inquire about availability and prices for side and condition you require. To purchase contact Sales at ZP |
This critical restoration part is NLA from Nissan and is very hard to find used in non-cracked condition these days Best quality 69-70 Series One: $300.00 Original, non-restored matching lighter and bracket is $50.00 - $60.00 extra when purchased with ashtray. |
|
Will install & work fine in 70-71 models, but is proper unit made for the 72 240Z models that did not have wiper delay feature such as came on 73 and later models. This wiper motor has been NLA from Nissan for many years. Price: $175.00 (SOLD) Many other good working, used, 70-89 wiper units for for sale priced $65.-$90. depending up model and condition. |
|
Excellent condition face plate, chrome controls, knobs, push buttons and clear station tuner front. Some chips in chrome plating around tuner dial.
|
$130. Will probably fit Z car consoles from 1974-1978. This unit may be original equipment for other 260Z & 280Z years. Please call to verify. Nissan p/n =Clarion Model RE-338D |
$5.50 ea
|
Hard to find old stock key blanks (not Nissan issue) pictured at left, fit early 240Z ignition locks. May fit other early Datsun cars & trucks that originally came with one sided keys.
|
 |
Nissan part # 96961-N4700 Price: $30.00 (SOLD) |
Have gas smells in your car or have gas leaking on ground after fill up? Good chance your filler tube is cracked and leaking. One of these good condition used ones could be the solution. NLA 240Z & early 260Z = $60. (out of stock) |
|
$30. each Nissan pn 80941-E4101 |
|
If your Z car has a cracked or torn steering rack boot you need to replace them ASAP to guard against road dust and grit getting into your rack and pinion steering rack internal, greased areas to avoid rapid deterioration of rack & pinion gear precision tolerances. When replacing boots, it is also wise to clean out and replace old, grit contaminated rack grease before installing a new boot. Price: $30.00 (one only) |
|
Put the finishing touch on your early Datsun restoration with this cherry looking new OEM air cleaner complete with Japanese text labels. Exact models that this cleaner fits has not yet been determined. Studying close up of under side hopefully wi il help a person restoring an early Datsun to clarify if this unit will properly replace the old and deteriorated one on car. Price: $125.00 |
|
|
|
|
|
||
Contact Eric at SALES@ZPARTS.COM for ordering information
Reconditioned & Polished Rare "#152" 69-70 240Z Tail lights
Photo at left shows both sides of one key blank. Please compare grove design with your original key to make sure they match before ordering because there is more than one, one sided key design for Datsun/Nissan cars & trucks
